Skip to main content Skip to search Skip to main navigation
Over 65 years of experience
Quality: "Made in Germany"
100 days return policy
Fast shipping & free returns
Customer service at 089 45915260
Hotline +49 800 123 454 321
Go to homepage

SPAX universal screw WIROX collated - partially threaded, countersunk head, T-STAR plus, 4CUT

Product information "SPAX universal screw WIROX collated - partially threaded, countersunk head, T-STAR plus, 4CUT"

The universal screw is the absolute all-rounder in SPAX's range. It can do almost everything – for example, it can be driven without pre-drilling into softwoods such as spruce and pine as well as into common engineered wood panels (MDF, chipboard and OSB panels). In doing so, this universal screw demonstrates its superiority above all in interior finishing and furniture construction, but it can also be used outdoors with the appropriate corrosion protection. Thanks to its special thread geometry, the insertion resistance when screwing is significantly lower than with conventional screws, which not only saves your strength and nerves but also the battery of your cordless screwdriver. Splitting of the wood near the edges is reliably prevented.

What this means for you: You will drive more screws per battery charge, and you no longer have to worry about split wood ends.

Spax universal screw WIROX magazine-fed - Features

The SPAX-typical drive T-STAR plus is a so-called internal six-lobed drive. This shape increases the contact area on our T-STAR plus, and the T-STAR plus bits sit perfectly in the screw head. The best possible transmission of power from the driver to the screw via T-STAR plus enables fast working, and this is considerably more efficient than with all other drives.

The countersunk head (or flat countersunk head) mills a recess into the wood with its polygonal underside ("pockets") and can therefore be countersunk without additionally countersinking the screw hole. The countersunk head sits flush with the surface.

Partially threaded screws are excellently suited for fastening thin components such as engineered wood panels, boards or floorboards to thicker components such as squared timber or beams. The short thread screws into the thicker component, while the unthreaded shank remains in the attached component. This creates maximum clamping pressure between the two. The unthreaded part should be at least the thickness of the attached component.

The term 4CUT stands for the square-shaped profile of the screw tip. These edges displace the wood fibres during insertion and create space for the core diameter of the screw. The spreading pressure exerted by the core in the wood is thus reduced and splitting of the wood near edges is prevented. The torque required from the cordless screwdriver is also reduced, because the screw's core does not have to be "squeezed" into the wood.

With WIROX, SPAX has developed a coating that is far superior to galvanising in terms of corrosion protection. WIROX does not use chromium(VI); the screws remain just as load-bearing after years in outdoor areas not directly exposed to the weather, and are also environmentally friendly. WIROX screws are the first choice for all open structures without direct exposure to the elements, such as carports or pergolas. For direct exposure to the elements, such as on terraces, we recommend our screws in the stainless steel variant.

Material: Steel
Klingengröße: T20
Zertifikat MIG: ja
Kopf-Ø in mm: 9.7 mm
Kopfwinkel: 90º
Surface: WIROX
Gewindeform: Teilgewinde
Kopfform: Senkkopf
Screw diameter: 5 mm
Drive: T-STAR plus
Spitze: 4CUT
SPAX Wellenprofil: 1
Gewindelänge in mm: 37 mm
Inhalt / Paket: 500 Stück
Zertifikat SKH: ja
Gewindeausziehparameter: 14 N/mm²
Korrosionsschutzcode DIN-EN 14592: T2/C2nw
Korrosionsschutzcode: A9J
Kopfunterseite: MULTI-Kopf
Zertifikat MPA: ja
Bei großen zu verschraubenden Flächen spielen die magazinierten SPAX alle ihre Vorteile aus. Das spart Zeit und erleichtert das Arbeiten.: Bei großen zu verschraubenden Flächen spielen die magazinierten SPAX alle ihre Vorteile aus. Das spart Zeit und erleichtert das Arbeiten, Bei großen zu verschraubenden Flächen spielen die magazinierten SPAX alle ihre Vorteile aus. Das spart Zeit und erleichtert das Arbeiten., Leichteres und schnelleres Verschrauben., Ohne Vorbohren (holzabhängig)
Schraubenlänge in mm: 60 mm
Content of Tab 1

SPAX – Hochleistungs-Schrauben für Profis und Heimwerker

SPAX steht für herausragende Qualität und Innovation im Bereich Verbindungstechnik. Als einer der führenden Hersteller bietet SPAX ein umfangreiches Sortiment an Hochleistungs-Schrauben, die sowohl für professionelle Handwerker als auch für ambitionierte Heimwerker entwickelt wurden. Die Produkte von SPAX zeichnen sich durch ihre exzellente Verarbeitung, Langlebigkeit und einfache Handhabung aus. Dank der einzigartigen SPAX-Technologie, wie der 4CUT-Spitze und der MULTI-Kopf-Form, ermöglichen sie ein präzises und schnelles Arbeiten in Holz, Metall und anderen Materialien. Entdecken Sie die vielfältigen und zuverlässigen Schrauben von SPAX in unserem Shop und profitieren Sie von erstklassigen Verbindungslösungen für Ihre Projekte. Vertrauen Sie auf SPAX – die Marke für Qualitätsschrauben "Made in Germany".

Content of Tab 2
tf.Detail.tabsgpsrTitle
tf.Detail.tabsgpsrSubTitle
SPAX International GmbH & Co. KG
 
Kölner Straße 71 - 77
58256 Ennepetal
Deutschland
E-Mail: info@spax.com
Telefon: +49 2333 799-0
Loading...
Upload in progress, please be patient ...
Shop Assistant AI

You are chatting with an AI assistant. Replies may contain errors and are non-binding.

Hello, I am your shop assistant, how may I help you?