Skip to main content Skip to search Skip to main navigation
Over 65 years of experience
Quality: "Made in Germany"
100 days return policy
Fast shipping & free returns
Customer service at 089 45915260
Hotline +49 800 123 454 321
Go to homepage

SPAX universal screw WIROX - full thread, rear-wall head, cross recess Z, 4CUT

Product information "SPAX universal screw WIROX - full thread, rear-wall head, cross recess Z, 4CUT"

The universal screw is the absolute all‑rounder in SPAX's range. It can do almost everything – for example, it can be driven without pre‑drilling into softwoods such as spruce and pine as well as into common wood‑based panels (MDF, chipboard and OSB boards). In doing so, this universal screw demonstrates its superiority above all in interior fitting and furniture construction, but it is also suitable for exterior use with the appropriate corrosion protection. Its special thread geometry means the driving resistance when screwing is significantly lower than with conventional screws, which saves not only your strength and nerves but also the battery of the cordless screwdriver used. Splitting of the wood near edges is reliably prevented.

What this means for you: You can drive more screws per battery charge, and you no longer need to worry about split wood ends.

Spax universal screw WIROX - features

The "Kraftangriff Kreuzschlitz Z" power drive is a further development of the basic Phillips cross‑power drive by the Philips Screw Company. The difference is that the four flanks of the screwdriver blade do not taper towards the tip. This increases the lateral support for the bit and reduces the cam‑out effect. Cam‑out occurs in conventional cross‑recess power drives due to the tapering, because the torque of the cordless screwdriver pushes the driver bit upwards.

In furniture making, properties such as head pull‑through resistance and clamping pressure are also required. Our universal screw with a rear‑panel head offers both, to fix the hardboard back panel to the rear of furniture carcasses. The flat shape does not protrude and increases the bearing area on the fibreboard. The head provides high retention and can be undone during any disassembly of the carcass and reused later.

Unlike partial threads, the full thread runs over the entire length of the screw. The more thread turns a screw has, the greater the tensile and compressive forces that can be transferred from the screw to the wood. Our fully threaded screws are primarily used for highly stressed wood joints.

The term 4CUT refers to the square profiling of the screw tip. These edges displace the wood fibres during insertion and create space for the core diameter of the screw. This reduces the splitting pressure exerted by the core in the wood and prevents splitting of the wood near edges. The required torque of the cordless screwdriver is also reduced because the screw core does not have to be "squeezed" into the wood.

With WIROX, SPAX has developed a coating that is far superior to galvanisation in terms of corrosion protection. WIROX does not use chromium(VI); the screws remain just as durable even after years in exterior areas not directly exposed to the weather, and are also environmentally friendly. WIROX screws are the prime choice for all open structures without direct weather exposure such as carports or pergolas; for direct exposure to the elements as with terraces we recommend our screws in the stainless steel version.

Material: Steel
Klingengröße: Z2
Zertifikat MIG: ja
Kopf-Ø in mm: 11.6 mm
Surface: WIROX
Gewindeform: Vollgewinde
Kopfform: Rückwandkopf
Screw diameter: 5 mm
Drive: Phillips head Z
Spitze: 4CUT
SPAX Wellenprofil: 1
Gewindelänge in mm: 56 mm
Inhalt / Paket: 500 Stück
Zertifikat SKH: ja
Gewindeausziehparameter: 14 N/mm²
Korrosionsschutzcode DIN-EN 14592: T2/C2nw
Korrosionsschutzcode: A9J
Flacher Kopf vergrößert die Auflagefläche auf der Platte: Flacher Kopf vergrößert die Auflagefläche auf der Platte, Höhere Kopfdurchzugskräfte
Zertifikat MPA: ja
Schraubenlänge in mm: 60 mm
Content of Tab 1

SPAX – Hochleistungs-Schrauben für Profis und Heimwerker

SPAX steht für herausragende Qualität und Innovation im Bereich Verbindungstechnik. Als einer der führenden Hersteller bietet SPAX ein umfangreiches Sortiment an Hochleistungs-Schrauben, die sowohl für professionelle Handwerker als auch für ambitionierte Heimwerker entwickelt wurden. Die Produkte von SPAX zeichnen sich durch ihre exzellente Verarbeitung, Langlebigkeit und einfache Handhabung aus. Dank der einzigartigen SPAX-Technologie, wie der 4CUT-Spitze und der MULTI-Kopf-Form, ermöglichen sie ein präzises und schnelles Arbeiten in Holz, Metall und anderen Materialien. Entdecken Sie die vielfältigen und zuverlässigen Schrauben von SPAX in unserem Shop und profitieren Sie von erstklassigen Verbindungslösungen für Ihre Projekte. Vertrauen Sie auf SPAX – die Marke für Qualitätsschrauben "Made in Germany".

Content of Tab 2
tf.Detail.tabsgpsrTitle
tf.Detail.tabsgpsrSubTitle
SPAX International GmbH & Co. KG
 
Kölner Straße 71 - 77
58256 Ennepetal
Deutschland
E-Mail: info@spax.com
Telefon: +49 2333 799-0
Loading...
Upload in progress, please be patient ...
Shop Assistant AI

You are chatting with an AI assistant. Replies may contain errors and are non-binding.

Hello, I am your shop assistant, how may I help you?