.jpg?ts=1727182302)
fischer Deutschland Vertriebs GmbH
fischer – Innovative Befestigungstechnik für Bau und Handwerk
Die Marke fischer steht weltweit für hochwertige Befestigungstechnik „Made in Germany“ und zählt zu den führenden Herstellern von Dübeln, Schrauben und Systemlösungen. Das Unternehmen entwickelt innovative Produkte für sichere Verankerungen in nahezu allen Baustoffen.
Das Sortiment umfasst Kunststoff- und Metalldübel, chemische Befestigungssysteme, Schwerlastanker, Schrauben sowie Installations- und Montagesysteme für professionelle Anwendungen.
Besonders bekannt sind Systemlösungen wie DuoPower oder FIS V Plus, die hohe Lastaufnahme mit einfacher Montage verbinden und für maximale Sicherheit sorgen.
The fischer Highbond anchor rod FHB II-A S is made of galvanised steel. The torque-controlled expanding composite anchor can be installed using the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When the hexagon nut is tightened, the cones of the anchor rod are drawn into the mortar sleeve, which clamps against the wall of the drilled hole. With the fischer Highbond system FHB II, railings, machinery and steel structures can be securely fastened indoors.
1 variantion
Content: 10 Stück (€13.00 / 1 Stück)
The fischer hollow drill FHD Max enables drilling and simultaneous cleaning of the drill holes in a single operation. Dust generation on construction sites is therefore greatly reduced, protecting both operators and the surrounding area from airborne drill dust. The wear marks on the drill head allow easy identification of the wear limit in accordance with PGM®. Ideal for drilling holes in critical indoor environments (hospitals, production halls, laboratories, next to traffic routes, for overhead installation...)
1 variantion
The fischer Quattric II hammer drill bit is a high-performance drill bit with an SDS-Plus shank. The carbide tip and the new two-piece flute design enable faster drilling and extend tool life. Its reinforcement phases prevent it from snagging on reinforcement. The drill bit is perfectly suited for approval-compliant drill holes in accordance with PGM.
1 variantion
The fischer TherMax stand-off mounting system is a solution for fixing into the external wall without thermal bridges in ETICS. The system consists of a special anchor rod made of electro-galvanised steel with a glass-fibre-reinforced cone, threaded studs and anchor sleeves for fixing into hollow brick. In combination with the fischer high-performance mortars FIS EM Plus, FIS V, FIS SB and FIS Green, the system is approved for numerous substrates. The anchor rod with the glass-fibre-reinforced cone cuts itself through the render into the insulation. The anchor rod is anchored in the anchor sleeve with an injection mortar in the substrate. The cone at the head of the anchor rod interrupts the thermal bridge and accepts the stainless-steel threaded stud for the external fixing. The TherMax secures heavy loads such as awnings, air-conditioning units and satellite installations in concrete, aerated concrete and masonry made of hollow and solid brick.
1 variantion
Content: 10 Stück (€39.95 / 1 Stück)
The fischer anchor rod FIS A is a system component for use with the fischer injection mortars FIS SB, FIS EM Plus, FIS V Plus, FIS V, FIS VL, FIS V Zero, Montagemörtel and Montagemörtel Green. Depending on the respective approval of the injection mortar, the anchor rod is suitable for the fastening of steel structures, staircases and machines indoors and outdoors in a wide range of base materials. The extensive range in diameters M6 - M30, various lengths and different steel grades allows for very diverse applications. The approvals of the respective injection mortars must be observed.
1 variantion
The fischer solid pipe clamp FRSM - inch is a two-screw pipe clamp made of galvanised steel, material grade DD11, with a ½" connection thread. The connection nut with an inch thread allows a pipe fixing with greater bending resistance. The two-screw design enables optimised adjustment to the external pipe diameter. This allows pipelines with an external diameter of 14–169 mm with threaded pipes for indoor installations to be securely fastened. With a chlorine- and silicone-free sound-damping insert, the pipe clamp meets the requirements of DIN 4109. The fischer FRSM - inch is suitable for applications in the temperature range -50 °C to +110 °C.
1 variantion
Content: 10 Stück (€37.06 / 1 Stück)
The fischer long-shank anchor SXRL-FUS is approved, together with the fischer hexagon screw with integrally formed washer and integrated bit socket, for multiple fixings of non-load-bearing systems in masonry, concrete and aerated concrete. In hollow brick masonry the anchor’s two expansion zones introduce load evenly; in aerated concrete and solid building material these merge into a long expansion element. With the safety screw made of electro-galvanised steel, the long-shank anchor is suitable for the fixing of metal constructions.
1 variantion
Content: 4 Stück (€1.12 / 1 Stück)
For anchors in coated concrete, the WHG Set can optionally be used to seal the drilled hole and to mark the anchorage. The WHG Set fills and reliably seals the annular gap, and marks the fixing point as a WHG-compliant anchorage. This enables the anchorage to be checked during the required inspections.
1 variantion
Content: 10 Stück (€42.78 / 1 Stück)
Get the practical L-BOXX now, filled with 910x DuoPower in various sizes. The DuoPower offers very good holding power thanks to two components: the grey component made of high-quality nylon automatically activates the optimal functional principle depending on the substrate (expansion, folding, knotting) for the best hold. The expansion wings of the red component assist secure spreading and provide additional support to the grey component. Simply screw in the screw and give a final 'pull'. Do not over-tighten the screw. The collar moulded on the plug prevents the plug from slipping into the drill hole.
1 variantion
The fischer DHK insulation fixing is the economical plastic insulation fixing for insulation boards with high compressive strength. The DHK is hammered in for through-fix installation. When hammered in, the ribs clamp in the drilled hole and the DHK is pressed on optimally. The fischer DHK insulation fixing is suitable for anchoring insulation boards in solid and hollow brick, concrete and aerated concrete.
1 variantion
Content: 250 Stück (€0.52 / 1 Stück)
The fischer KDS Kippdübel with VdS and FM approvals is a fastening element for trapezoidal sheet decks and provides a secure, objectively tested solution for fastening pipework in fixed sprinkler systems. Other components such as mounting rails, ventilation ducts, cable trays and lighting systems can also be quickly attached to trapezoidal sheets thanks to the simple handling. The height-adjustable threaded rod, secured against accidental unscrewing, allows practical alignment of the components to be mounted on the trapezoidal sheet. The range of different lengths helps in selecting the appropriate KDS Kippdübel for the respective application.
1 variantion
Content: 25 Stück (€7.03 / 1 Stück)
The fischer Einschlaganker EA II R is an internally threaded anchor made of stainless steel. The impact anchor is driven flush to the substrate with a hammer. Using the setting tool EHS Plus or the machine setting device EMS, the sleeve is expanded by driving in the internal pin and clamps against the drill-hole wall. For correct expansion, no torque needs to be applied to the screw or threaded rod. The fischer Einschlaganker EA II R is ideal for fastening steel structures and formwork props outdoors with approval.
1 variantion
Content: 20 Stück (€21.86 / 1 Stück)
The fischer hammer-head screw FCN Clix S is suitable for the quick and easy fastening of pipe clamps in fischer FUS mounting rails without the use of additional set screws. The hammer-head screw is engaged with the rails by a 90° rotation and is held in the desired position in the FUS mounting rail by the contact pressure of the spring element and the pronounced serration of the sliding nut. Error-free installation is facilitated by the ability to adjust it before the locknut is tightened. The FCN Clix S is available in various sizes and lengths. The electro-galvanised version is suitable for indoor installations.
1 variantion
Content: 50 Stück (€5.24 / 1 Stück)
The fischer PowerFast FPF II CTF A2 is a screw made of A2 stainless steel with full thread and an internal Torx (TX) drive. The countersunk head allows flush mounting in timber. The continuous thread along the entire screw length ensures optimal transmission of force. The screw is ideally suited for fastening in general timber connections, for panelling, skirting boards and door and metal fittings.
1 variantion
The fischer Dynamic-Anker FDA-A with pre-assembled anchor rod for rapid installation. The steel anchor is suitable for through-bolt installation and small edge distances also permit fixing at the plate edge. Proven safety through general building authority approval for an infinite number of load cycles. The Dynamic anchor can be fully bonded to the borehole wall with the FIS HB injection mortar. Thanks to its medium load capacity it is suitable for a wide range of applications such as vehicle lifts, conveyors, industrial robots, collaborative robots and equipment, as well as elevator guide rails.
1 variantion
Content: 10 Stück (€23.10 / 1 Stück)
The fischer connecting elements PFUF 2D, 3D and 4D connect multidimensional constructions to the FUS mounting rails and the PFCN through connector. With the PFUF 3D and 4D connecting elements, multi-sided shaft constructions can be created quickly and easily. The electro-galvanised version is suitable for installations in buildings; the versions with a hot-dip galvanised or zinc-flake (zl) finish and those made of stainless steel are suitable for outdoor installation and highly corrosive environments.
1 variantion
Content: 10 Stück (€76.77 / 1 Stück)
Using the FH II‑I setting tool, the high‑performance internal thread anchor FH II and FH II‑I are installed in accordance with the approval. During installation with a setting tool, the cone of the FH II‑I is drawn into the expansion sleeve, clamping it against the borehole wall. At the same time the anchor shortens as the black plastic ring is compressed. This causes the anchor sleeve to sit beneath the borehole rim in accordance with the approval.
1 variantion
Content: 10 Stück (€2.44 / 1 Stück)
The fischer Highbond-Anker dynamic FHB-A dyn is manufactured from electro-galvanised steel. The load-controlled expanding bonded anchor is used with the Highbond special mortar FIS HB. When the hexagon nut is tightened, the cones on the anchor rod are drawn into the mortar shell, which clamps itself against the borehole wall. During installation the injection mortar FIS HB fills the annular gap in the attached component and ensures optimal load distribution. This enables the absorption of dynamic pulsating and alternating loads. The fischer Highbond-Anker dynamic FHB-A dyn is ideally suited for fastening lift guide rails, industrial robots or gantry and overhead travelling cranes indoors.
1 variantion
Content: 10 Stück (€21.72 / 1 Stück)
The FCA cantilever bracket is suitable as the second basic element of the FUS rail system for securing installations such as pipe trays along the wall. The cantilever bracket is fixed directly to the substrate via the elongated holes in the base plate, which are rotated 90° to each other. fischer offers standard lengths from 200 - 1000 mm, so cutting to length is not necessary. This saves time and expense. The electro-galvanised version is suitable for installations inside buildings, while the hot-dip galvanised and stainless steel versions are intended for outdoor installation and highly corrosive environments. The fire protection certification according to MLAR/EN 13501 provides an added level of safety.
1 variantion
The fischer hose clamp SGS secures transitions and spigots to hoses reliably and with a tight seal. The rolled edge of the clamp prevents damage to the hose. The combination cross‑slot drive simplifies installation. fischer offers the hose clamp SGS in clamping ranges from 8 - 140 mm.
1 variantion
The fischer FSP II CZF YC is an electro-galvanised, yellow passivated chipboard screw with a countersunk head, Pozidriv (PZ) drive and full thread. The economical chipboard screw is suitable for use in a wide range of woods. The countersunk head with Pozidriv (PZ) drive allows easy and secure positioning of the tool. The full thread provides increased pull-out resistance due to the longer thread. CE conformity offers an additional measure of safety.
1 variantion
Content: 500 Stück (€0.05 / 1 Stück)
The fischer mounting rail FLS is a basic element of the flexible rail system. The C-profile in three heights provides the structural elements of the FLS system with secure support thanks to pronounced serration and corner ribs. This enables quick and efficient fastening of pipe runs and support structures in horizontal and vertical installations. Alternating slotted holes for optimal fixing, together with scale markings on the rails that assist cutting to length and positioning of the connecting elements, provide safety and simplify installation. The fire test report according to MLAR / EN 1363-1 for the FLS 37 offers an additional level of safety.
1 variantion
The fischer FSP II CZP BC is a galvanised, blue-passivated particleboard screw with a countersunk head, Pozidriv (PZ) drive and partial thread. The economical particleboard screw is suitable for use in a wide range of woods. The countersunk head with Pozidriv (PZ) drive enables easy and secure positioning of the tool. The partial-thread design allows a firm drawing together of wooden components. CE conformity provides an additional level of safety.
1 variantion
Content: 200 Stück (€0.13 / 1 Stück)
The fischer N Green nail anchor with countersunk head consists of a plastic anchor sleeve and an electro-galvanised nail screw. These are pre-assembled for quick installation. The granulate used to manufacture the fischer N Green nail anchor is sourced at least half from renewable raw materials. These do not compete with land used for growing food or feed. The N Green nail anchor offers the same performance characteristics and load-bearing capacity as the original. The nail anchor is inserted through the fixture in the time-saving through-fixing installation. When the nail screw is driven in, the anchor sleeve expands and anchors securely in the substrate. The fischer N Green nail anchor with countersunk head is ideal for fixing timber constructions in all building materials indoors.
1 variantion
Content: 15 Stück (€0.31 / 1 Stück)