.jpg?ts=1727182302)
FORUM
FORUM – Präzisionswerkzeuge für Profis
FORUM steht für erstklassige Werkzeuge und Werkstattbedarf, die höchsten Qualitätsansprüchen genügen. Als etablierte Marke im Bereich Werkzeugtechnik bietet FORUM ein umfangreiches Sortiment, das speziell für professionelle Handwerker und anspruchsvolle Heimwerker entwickelt wurde. Die Produkte von FORUM zeichnen sich durch ihre robuste Verarbeitung, hohe Präzision und Langlebigkeit aus. Vom Schraubendreher bis zum Werkstattwagen – FORUM liefert die perfekten Lösungen für jede Aufgabe und überzeugt mit innovativen Details und ergonomischem Design. Entdecken Sie die Vielfalt und Zuverlässigkeit der FORUM-Werkzeuge in unserem Shop und statten Sie sich mit erstklassigem Equipment für jede Herausforderung aus.
Fiebers grinding disc - Steel processing Features Aluminium oxide (corundum) Vulcanised fibre backing material Standard bore 22 mm With inner hole and cross slot
1 variantion
End mills – short, HSS-Co8, Type N, surface TiAlN-coated• Design: short • HSS-Co8 • Type N • 4–6 flutes • DIN 844-K • DIN 1835-B • Helix angle 30° • For peripheral and face milling • Centre-cutting • Sharp-edged
1 variantion
Ball-end L-shaped hex key for internal hex screws, lacquered• Chrome-vanadium steel • Based on ISO 2936 L (DIN 911 L) • Different colours make it easier to identify the hex key sizes
1 variantion
SDS-max hammer drill bitsNote: For long drill bits used with a short drill bit of the same diameter, pre-drill to a depth of at least 150 mm.• Two-cutting-edge geometry • Specially hardened surface for increased resistance to breakage during hammer drilling • High drilling speed and precise drill-starting behaviour • Wide flute profile for good drilling progress • For concrete, stone and masonry
1 variantion
Round dies, G (BSP)• Whitworth pipe thread to DIN EN ISO 228 • DIN EN 24231 • HSS • Closed, pre-slotted form • Chamfer 1.75 x pitch • Gauge-retaining external threads • Shear cut on both sides
1 variantion
Economy roll for metalworking• Corundum • Cloth backing • Roll length 50 m • For metalworking
1 variantion
Abrasive belt• Zirconia alumina • Polyester fabric backing • For grinding steel, stainless steel and grey cast iron
1 variantion
Solid carbide end mill, long, 4 flutes, 30°, uncoated• Version: long • Solid carbide • Type N • 4 flutes • DIN 6527-L • DIN 6535-HB • For peripheral milling, trimming, finishing milling, for universal machining • Helix angle 30° • Max. milling depth 2 x D • With centre-cutting
1 variantion
Pipe cutter for pipe Ø 3–30 mm, FORUM• ICS system (cutting-wheel quick-change system) • Spindle with steel bearings • Pressure regulation by rotary knob • 2 guide rollers with notch • For clean cutting of copper, brass, aluminium and thin-walled steel pipes
1 variantion
Solid carbide shank end mill – long, shank HB, UF, Type N, DIN 6527, surface TiAlN-coated, with centre-cut, FORUM • Version: long • Solid carbide UF • Type N • 2 flutes • DIN 6527 • DIN 6535-HB • Helix angle 30° • Suitable for general machining as well as slotting • Max. milling depth 1.5 x D • With centre-cut • Dry machining possible
1 variantion
Die holder with clamping screw• Zinc die-cast housing ZL 0410 • EN 22568 • Removable steel handles • With 4/5 clamping screw Note: For direct mounting of solid and slotted dies to EN 22568 and EN 24801.
1 variantion
Lever-type test indicator, FORUM• Accuracy according to DIN 2270 • Measuring contact pivotable at right angles to the scale • Measuring movements mounted on rubies • Automatic switching of the measuring direction • Housing with three milled dovetail guides to accept the clamping shank (Ø 8 mm h6) • Housing chrome-plated to protect the dovetail guides from damage • Resistant to impacts • Feeler lever shaft mounted in precision ball bearings • Measuring contact Ø 2 mm, fitted with a carbide ball • Rotatable outer ring Delivery: In a plastic case, including a key for replacing the measuring contact.
1 variantion
Workshop steel straightedge• DIN 874/II • Made from mild steel, high edges and flat faces precisely machined • For accurate truing work in general mechanical engineering and in the workshop
1 variantion
Edge pliers, special tool steel• Kopf poliert • DIN ISO 9243
1 variantion
Fillet-weld non-woven compact disc, straight• Non-woven abrasive and abrasive grain with a special grain-binder structure • Standard bore 22.23 mm • Material removal and finish in a single operation • Cleaning and levelling of fillet welds • Fine grinding to prepare for polishing
1 variantion
- Beschlagfrei beschichtet
- Zwei-Komponenten-Bügelende
- erfüllt EN 166
- weicher, flexibler, guter Sitz
1 variantion
Trapezoid blade for utility knives, FORUM• Secure blade removal, as the cutting edge is located at the rear • For general and heavy cutting work in paper, cardboard, leather, vinyl and carpetDelivery: In a robust plastic stand, for standing or hanging
1 variantion
Abrasive belt for metalworking• Alumina • Dense grain distribution • Cotton backing • For ferrous and non-ferrous metals, for deburring and working on welds and solder joints
1 variantion
Abrasive belt, narrow• Zirconia alumina • Polyester fabric backing • Dense zirconia alumina coating • For coarse grinding and deburring of steel and stainless steel
1 variantion
Carbide-tipped circular saw bladeAlternate tooth, negative (W neg.) • For universal use on mitre and pendulum circular saw machines • Suitable for soft and hard solid wood, both wet and dry, wood-based materials, thermoplastics, duroplast profiles
1 variantion
Pin punch• Octagonal shank • Cylindrical pin form • Chromium–vanadium air‑hardening steel • Tempered striking head • DIN 6450 • Bulging, flaring and chipping are virtually eliminated by the tempering
1 variantion
Aluminium shank end mill for aluminium – short, HSS-Co8, type W, bright finish, with centre cut• Version: short • HSS-Co8 • Type W • 3 flutes • DIN 844-K • DIN 1835-B • Helix angle 40° • For peripheral and plunge milling • With centre cut and protective chamfer
1 variantion
Weld gauge with slider• Made of stainless steel • Measuring range 20 mm • For measuring flat welds and corner welds as well as V-groove weld angles 60°/70°/80° and 90° Delivery: In a case.
1 variantion
Hook-and-loop sanding disc for wood and metal• Aluminium oxide • Paper backing with hook-and-loop velour • Good material removal and long service life • Suitable for sanding wood and metal• For Festool and Holz-Her
1 variantion