.jpg?ts=1727182302)
fischer Deutschland Vertriebs GmbH
fischer – Innovative Befestigungstechnik für Bau und Handwerk
Die Marke fischer steht weltweit für hochwertige Befestigungstechnik „Made in Germany“ und zählt zu den führenden Herstellern von Dübeln, Schrauben und Systemlösungen. Das Unternehmen entwickelt innovative Produkte für sichere Verankerungen in nahezu allen Baustoffen.
Das Sortiment umfasst Kunststoff- und Metalldübel, chemische Befestigungssysteme, Schwerlastanker, Schrauben sowie Installations- und Montagesysteme für professionelle Anwendungen.
Besonders bekannt sind Systemlösungen wie DuoPower oder FIS V Plus, die hohe Lastaufnahme mit einfacher Montage verbinden und für maximale Sicherheit sorgen.
Using the fischer PFUF OC rail connector, mounting rails can be connected and precisely aligned. In conjunction with the FCN Clix P, the PFUF OC rail connector allows simple and rapid installation.
1 variantion
Content: 6 Stück (€34.85 / 1 Stück)
Get the practical L-BOXX now — filled with PowerFast II screws with partial thread in common sizes and a professional bit set. The fischer PowerFast II is an electro-galvanised, blue-passivated screw with full or partial thread and an internal star (Torx) drive. The countersunk head allows flush mounting in timber. The partial-thread version allows the firm clamping together of timber elements. The screw is suitable for fastening load-bearing components in coated timber, hardwood, softwood and timber joints.
1 variantion
The fischer TherMax 10 stand-off mounting system is a solution for fixing to the external wall without thermal bridges in the external thermal insulation composite system (ETICS). The stud screw with the glass-fibre-reinforced cone is self-cutting and bores through the render into the insulation. During installation the stud screw is screwed into the UX universal plug and thus anchors securely in the base material. The thermal-break cone at the head of the stud screw interrupts the thermal bridge and accommodates the external fixing. The TherMax fastens light loads such as light fittings, letterboxes or lightning conductors in concrete, aerated concrete and masonry made of hollow and solid brick.
1 variantion
Content: 20 Stück (€8.64 / 1 Stück)
The fischer mounting profiles FMP are the optimal base elements of the fischer massive rail system FMS for securing heavy pipework and substantial structures. The FMP mounting profiles consist of square-section profiles in three heights. The formed perforations on all sides of the mounting profile allow the attachment of structural elements on all sides as a basis for a positive-locking connection. The embossed scale simplifies cutting the FMP mounting profiles to length and ensures the correct mounting of the structural elements. The hot-dip galvanised finish with a high coating thickness is suitable for outdoor installations and corrosive environments.
1 variantion
The fischer U A4 washer is a mounting element for the fischer installation system. The washer is made from high‑grade A4 stainless steel.
1 variantion
Content: 100 Stück (€0.59 / 1 Stück)
The standard nails DFN NP, used together with the FGC 100 and FXC 85, enable the fixing of rails or cables to solid brick, sand‑lime brick or lightweight concrete with a strength class below C 30/37.
1 variantion
Content: 1.008 Stück (€126.21 / 1 Stück)
The fischer hammer-head screw FHS Clix is a fastening element for securely connecting pipe clamps to the fischer FLS mounting rail system. The FHS Clix is locked by a 90° rotation. The FHS Clix is available in sizes M8 and M10 in lengths of 30–100 mm. The special spring arm on the FHS Clix guarantees the necessary contact pressure of the fastener in the FLS mounting rail for secure adjustment during installation. The pronounced serration on the sliding nut also enables precise and secure positioning in the FLS mounting rails and simplifies installation. The electro-galvanised version is suitable for indoor installations. The fire protection certification provides an additional level of safety for the sliding nut.
1 variantion
Content: 50 Stück (€3.63 / 1 Stück)
The fischer high-temperature silicone DHS is suitable for joints exposed to elevated temperatures of up to 280 °C on cookers, ovens and fireplaces. Its high chemical resistance ensures safe and reliable use. It provides excellent adhesion to smooth surfaces for a complete seal and dependable performance. Easy to apply and to smooth.
1 variantion
Content: 0.31 Liter (€64.00 / 1 Liter)
The robust fischer fixed point clamp FFPC with load-optimised clamping band is suitable for use on all hot-running pipelines to direct thermally induced pipe expansions in the desired direction and prevents unwanted displacement. The FFPC fixed point clamp can be mounted on the fixed point saddles FFS-M or FFS-H as well as on the braced fixed points FFP. The electro-galvanised version is suitable for installations inside buildings.
1 variantion
Content: 2 Stück (€92.42 / 1 Stück)
The fischer brass anchor PA 4 is a specialised anchor for fixing metric screws in thin panel building materials. The brass anchor is installed using pre-positioned mounting. When the screw is tightened, the anchor expands and secures itself in the substrate. The fischer brass anchor PA 4 is ideal for fixing handles, mounting brackets or lamps in wood-based panel materials, plastic panels, but also in concrete, solid brick and sand-lime brick.
1 variantion
Content: 25 Stück (€1.71 / 1 Stück)
The fischer dispensing tool FIS DM S-L is suitable for the quick and effortless dispensing of fischer large-volume 585 ml injection cartridges.
1 variantion
Hot-rolled anchor rails combine the highest load-bearing capacity and safety.
1 variantion
The fischer insulation disc DTM A4 is used in combination with a fischer long‑shank anchor where increased corrosion protection is required. This allows insulation boards to be fixed to all substrates. During installation the fischer long‑shank anchor is driven through the insulation disc into the drilled hole and the screw is then driven in.
1 variantion
Content: 100 Stück (€1.10 / 1 Stück)
The fischer terrace screw FTS-ST A2P with a flat countersunk head, TX internal star drive and partial thread is ideal for a flush, splinter-free fixing of terrace substructures and decking boards made of wood. The TX internal star drive enables maximum torque transfer with high bit stability. The innovative special thread profile makes screwing in easier even in hardwoods. The partial thread also allows the boards to be pulled tightly against the substructure. The terrace screw made of stainless steel A2 offers high resistance to weathering and tannins. The flat head geometry ensures a precise, splinter-free surface finish even for fixings close to the edge.
1 variantion
Content: 150 Stück (€0.27 / 1 Stück)
The fischer Schienenfuß VB is a mounting element for the flexible configuration of load-bearing structures made from profiles. For installations with FUS rails from 0–180°. The perforation of the base plate allows fixing directly to a wall or ceiling, or onto a mounting rail.
1 variantion
Content: 5 Stück (€20.03 / 1 Stück)
fischer rail connectors are optimal connecting elements from rail to rail as well as from rail to substrate or steelwork. The connection to the FMP mounting profile is consistently made with the fischer hammer-head plug connector FMHB or by carrier clamps and anchors to the substrate. The hot-dip galvanised version with a thick coating is suitable for outdoor installations and corrosive environments.
1 variantion
Content: 2 Stück (€173.47 / 1 Stück)
The fischer Highbond anchor rod FHB II-A S R is made of stainless steel. The force-controlled expanding bonded anchor can be used with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When the hexagonal nut is tightened, the cones of the anchor rod are drawn into the mortar sleeve, which wedges itself against the drill-hole wall. With the fischer Highbond system FHB II, façades, railings and steel structures outdoors are securely fastened.
1 variantion
Content: 10 Stück (€30.83 / 1 Stück)
The fischer angle support WS 31-45° provides a supporting structure with very high stability and safety. The dimensions of the angle bracket ensure, through precise fit, a secure connection with ALK consoles and FLS mounting rails. The angle support transfers the load either to the wall or to a mounting-rail construction. The FSM Clix P sliding nut and a screw provide the connection to the mounting-rail profile. The electro-galvanised version is suitable for installations in buildings.
1 variantion
Content: 10 Stück (€21.94 / 1 Stück)
The fischer injection threaded anchor FIS GS is manufactured from electro-galvanised steel of steel grade 5.8. The threaded anchor and the sieve sleeve FIS H K are system accessories for the fischer injection system FIS. When installing in solid substrates with the injection mortars, the anchor rod is pushed into the drill hole by hand with slight rotary movements. For use in hollow-block masonry, the anchor sleeve FIS H K is first inserted into the drill hole so that the mortar is pressed through the mesh structure when the anchor rod is set and forms a positive-fit connection with the hollow block.The system is particularly suitable for the economical fixing of machines, steelwork and support feet for interior use.
1 variantion
The fischer Gewindestift GS is a connecting element between the anchorage point in the load-bearing element and the fixing element on the suspended or mounted element. For example, pipes or ventilation ducts are attached to it. The threaded rod is made from high-quality stainless steel.
1 variantion
Content: 50 Stück (€1.65 / 1 Stück)
Hot-rolled anchor rails combine excellent load-bearing capacity with a high level of safety and flexibility.
1 variantion
The fischer FAW adjustment wheel is a connector used for height adjustment and for stabilising suspended FUS rail profiles with threaded rods without the use of tools. The shape of the adjustment wheel aids the guidance and stabilisation of the FUS mounting rail, as well as central alignment by engaging the open side of the rail. Because it has been fire-tested, the FAW adjustment wheel can also be used for installations in escape and rescue routes. The electro-galvanised version is suitable for installations inside buildings.
1 variantion
The fischer PowerFast decking screw A2 FPF-ST A2P is a screw for fastening decking boards to timber substructures. The PowerFast thread ensures a quick bite and the additional milling ribs on the shank reduce driving resistance, allowing work to be less strenuous and preserving battery life. The PowerFast screw made of A2 stainless steel, with partial thread, small countersunk head and internal Torx drive, can be used with a wide range of decking timbers, for example Accoya, Bangkirai, Douglas fir, oak, IPE, Itauba, Kapur, larch, Massaranduba and Robinia. For optimal results, pre-drilling and countersinking are generally recommended.
1 variantion
Content: 200 Stück (€0.53 / 1 Stück)
Hot-rolled anchor rails combine excellent load-bearing capacity with high safety and flexibility.
1 variantion