.jpg?ts=1727182302)
fischer Deutschland Vertriebs GmbH
fischer – Innovative Befestigungstechnik für Bau und Handwerk
Die Marke fischer steht weltweit für hochwertige Befestigungstechnik „Made in Germany“ und zählt zu den führenden Herstellern von Dübeln, Schrauben und Systemlösungen. Das Unternehmen entwickelt innovative Produkte für sichere Verankerungen in nahezu allen Baustoffen.
Das Sortiment umfasst Kunststoff- und Metalldübel, chemische Befestigungssysteme, Schwerlastanker, Schrauben sowie Installations- und Montagesysteme für professionelle Anwendungen.
Besonders bekannt sind Systemlösungen wie DuoPower oder FIS V Plus, die hohe Lastaufnahme mit einfacher Montage verbinden und für maximale Sicherheit sorgen.
fischer saddle flanges are optimal connection elements from rail to substrate or steelwork. The connection to the mounting profile FMP is consistently made with the fischer hammerhead plug-in connector FMHB or by carrier clamps and anchors to the substrate. The hot-dip galvanised version with a high coating thickness is suitable for outdoor installations and corrosive environments.
1 variantion
The fischer pipe clamp FRS Plus enables simple and time-saving installation of pipework thanks to its quick-release. The two-screw design allows optimised adjustment to the pipe's external diameter. A safety lock and a firmly seated sound-damping insert ensure secure pipe alignment. Connection nut with combined thread M8/M10 for accepting threaded rods or hanger bolts. Pipe clamp screws with captive retention.
1 variantion
The fischer SCH clamp is a fastening solution for accommodating cables and plastic insulating conduits of various diameters. The clamp is installed using the fischer N 5 nail anchor. When hammered in, the nail screw expands the anchor sleeve against the wall of the drilled hole. Afterwards, the plastic insulating conduits and the cables are placed into the clamp and secured by inserting the locking clip.
1 variantion
Content: 50 Stück (€0.92 / 1 Stück)
The fischer ProfiBit FPB PZ is a robust and powerful bit with a Pozidriv (PZ) drive, suitable for all screw applications. The use of high-quality steel with a material hardness of approximately 60 HRC and manufacture to ISO standards ensures a long service life. The fischer ProfiBit is resistant to wear and breakage.
1 variantion
The fischer DIPK hammer fixing is ideal for securely fixing rigid insulation materials up to 160 mm thick, such as polystyrene boards, wood-wool lightweight construction boards and rigid polyurethane (PU) foam boards, into concrete and into solid and hollow masonry. When used in solid base materials the glass-fibre reinforced plastic (GRP) nail must be shortened at the tapered predetermined breaking point. The DIPK consists of a white fixing sleeve with an integral moulded flange and a glass-fibre reinforced plastic nail. The DIPK is driven in with a hammer, saving time and costs. The glass-fibre reinforced plastic nail reduces thermal bridging and prevents marking on the render surface.
1 variantion
Content: 200 Stück (€0.86 / 1 Stück)
The fischer WK angle bracket is for bracing and fastening pipework and components. It gives the supporting structure very high stability and safety. Its design allows the attachment of pipe clamps or mounting rails.
1 variantion
Content: 5 Stück (€29.84 / 1 Stück)
The fischer DVN retaining clip is an insulation clamp made of Sendzimir-galvanised steel. The clip is driven into the wood with a hammer using the nail supplied in the set. To ensure the insulation boards are held firmly, the prongs are pressed into the grooved side. The fischer retaining clip is ideal for fixing compression-resistant insulation boards to wooden substructures and the undersides of ceilings.
1 variantion
Content: 250 Stück (€0.82 / 1 Stück)
The fischer S-VB tensioning element enables the bracing of frame constructions with mounting rails. The mounting rail can be quickly inserted into the receptacle of the tensioning element. For additional safety, two tensioning elements can be mounted one above the other and tension the same point in several directions.
1 variantion
The fischer double-thread screw PowerFull FIF-ST ZPF with double thread, cylinder head and internal star TX drive is ideal for fastening non-compression-resistant insulation in above-deck roof insulation. The internal star TX drive enables maximum torque transmission with excellent bit stability. The thread geometry provides optimal force transmission. The European Technical Assessment (ETA) provides an added level of safety. The geometry of the screw tip allows fastening without pre-drilling. The large thread pitch results in noticeably faster screw-in times. The slim cylinder head reduces splitting and prevents cracking in near-edge fixings.
1 variantion
Content: 50 Stück (€2.04 / 1 Stück)
Stone drill with carbide plate according to DIN 8039, roll-formed. The 130° carbide cutting edge provides a long service life and guarantees high heat resistance.
1 variantion
The fischer metal insulation holder DHM is simply hammered in. The hammer-fit installation allows a quick setting operation, thereby reducing labour. Thanks to its achieved fire-resistance rating F 120, it can be used where requirements for fire-resistance duration apply. The metal insulation holder DHM can be used to fix, for example, stone and glass wool, foam glass boards and wood-wool lightweight boards.
1 variantion
Content: 250 Stück (€1.06 / 1 Stück)
The fischer PU dispensing guns are optimally matched to the fischer pistol foams and provide the ideal dispensing device for every application.
1 variantion
The fischer PowerFast FPF II STP BC is an electro-galvanised, blue-passivated screw with a partial thread and an internal star (Torx) drive. The stepped countersunk head can be countersunk as easily as a standard countersunk head and additionally offers the advantage of increased pull-out strength due to its large head diameter. The partially threaded design enables secure clamping of timber elements.
1 variantion
Content: 100 Stück (€0.30 / 1 Stück)
The fischer flap disc FFD-AP is a powerful zirconia flap disc for machining steel and stainless steel. The self-sharpening zirconia-alumina abrasive grain, combined with the optimised bond matrix, guarantees a long service life with high material removal performance.
1 variantion
The fischer nail anchor FNA II with nail head is manufactured from electro-galvanised steel. The FNA II is installed time-efficiently as a through-fixing with just a few hammer blows. Under load the FNA II automatically expands: the cone is drawn into the expansion clip and tensions it against the drilled hole. The fischer nail anchor FNA II with nail head is particularly suitable for fastening fire-protection cladding, wire hangers and Nonius hangers for interior use.
1 variantion
Content: 50 Stück (€0.61 / 1 Stück)
The fischer insulation disc DT is used in combination with the fischer facing anchor VB. This allows soft insulation boards to be fastened in all building materials. The insulation disc is then slipped onto the mounted fischer facing anchor VB.
1 variantion
Content: 250 Stück (€0.35 / 1 Stück)
Manual metal setting tool with an ergonomic plastic handle and hand-strike guard for the quick and secure installation of fischer EA II drive-in anchors.
1 variantion
The fischer gas cartridge FC 165 allows more than 1,100 fixings to be set with the FGC 100.
1 variantion
The fischer ZYKON bolt anchor FZA is an anchor made of stainless steel. The specialised drill bit FZUB creates the undercut hole in a single operation. The undercut anchor is installed using the pre‑positioning method. Using the setting tool FZE Plus, the expansion sleeve is driven over the cone and fills the undercut hole to create a form‑fit. The fischer ZYKON bolt anchor FZA is ideal for fixing façades, railings and steel structures outdoors in cracked concrete.
1 variantion
Content: 10 Stück (€27.36 / 1 Stück)
The fischer HybridPower combines the advantages of a conventional plastic plug with the security of a steel anchor. By combining the two materials, the HybridPower is installed like a conventional plastic plug and can be used in all building materials. At the same time it offers high load capacities and a secure anchorage, even in the event of fire. The range is suitable for metal and timber fixtures up to 10 mm thick. The plug can be installed by pre-positioning or by push-through installation.
1 variantion
The seismic wire-rope system FWI-S is designed for the fastening and securing of installations in buildings. It offers an effective solution for securing installations against forces acting horizontally, e.g. during earthquakes. In addition, the FWI-S system can also be used to suspend installations of building services. The preconfigured sets in lengths of 2, 3 or 5 m are equipped with all necessary components to safely tension existing installations or to secure new installations. Three different wire-rope diameters — 2, 3 and 5 mm — allow selection of the appropriate wire-rope system for your load case. Colour coding ensures each set is clearly identifiable during installation and in operation.
1 variantion
The fischer SX Plus expansion plug, with its four-way expansion, is the specialist for solid base materials such as concrete, sand-lime brick and masonry. The special locking wings provide pre-fixation of the screw, so it does not need to be held in place during overhead applications. This screw fixation enables a flexible and comfortable installation process for the user. The flexible collar of the plug also prevents the plug from sinking too far into the drilled hole, ensuring a secure mounting. The supplied screws are perfectly matched to the fischer SX Plus expansion plug. The high-quality nylon material guarantees long-lasting secure hold in a wide range of solid and hollow building materials.
1 variantion
Content: 50 Stück (€0.26 / 1 Stück)
The fischer WST fixing set includes all components for the secure attachment of washbasins to the wall: 2 fischer universal plugs UX 14 x 75 made from high-quality nylon, 2 threaded studs, electro-galvanised, 2 hex nuts, electro-galvanised, and 2 collar sleeves. With the fischer universal plug UX the set can be mounted in solid and hollow building materials.
1 variantion
Content: 2 Stück (€3.43 / 1 Stück)
The fischer Rohrschelle FRS is a two-screw pipe clamp made of electro-galvanised steel, material grade DD11, with a combined connection thread M8/M10. The two-screw design enables optimised adjustment to the external pipe diameter. Together with the combined connection thread, this increases flexibility. This allows pipelines with an external diameter of 12 - 168 mm to be securely fastened with threaded rod or stud in accordance with the fire-protection requirements of fire resistance class R 120 and the MLAR for indoor use. With a chlorine- and silicone-free acoustic insulation insert, the pipe clamp meets the requirements of DIN 4109. The fischer FRS is suitable for applications in the temperature range -40 °C to +100 °C.
1 variantion
Content: 50 Stück (€4.71 / 1 Stück)